Product Description
Micro-sprinkler is the most reasonable small-flow irrigation equipment for vegetables, orchards, landscaping, greenhouses, nurseries, cooling, frost prevention and garden irrigation.
This series of micro nozzle components are made of high-quality materials that are resistant to UV and chemical corrosion, ensuring maximum precision and service life. To meet needs, micro nozzle components can be replaced with each other.
Product introduction
The ground plug micro-spray is composed of a plug rod, a capillary, a joint and a nozzle. The atomization range is 3-4 meters, and the rotation range is 6-8 meters. It can effectively get a uniform spraying effect on crops per unit area.
It is understood that this year, the Municipal Agricultural Technology Extension Station installed a micro-spray system under the membrane on the production of watermelon at a 500-mu facility in the suburbs of Beijing. Data statistics show that based on 1 mu of land, the traditional watering method needs to be watered with 40 cubic meters of water, and the water demand for planting water, slow seedling water, and extension water is about 30 cubic meters each time. The water used for two watering of bulging melon is 50 cubic meters, respectively, with a total water consumption of 170 cubic meters. With the watering method of micro-spray irrigation under the membrane, the amount of water used for planting water is reduced to 25 cubic meters, and the water consumption for planting water, slow seedling water, and extension water is 47 cubic meters. The water consumption for two watering of bulging melon is reduced to 35 cubic meters. Compared with traditional watering, the total water consumption can be reduced by about 70 cubic meters, saving more than 40% of water
